MCP2200 преобразователь протоколов USB в UART с дополнительными линиями ввода/вывода PDF




Разделы
 Главная
 Схемы
 Купи продай
 Софт
 КВ аппаратура
 Репитеры Пензы
 DX Cluster
 Поиск
Счётчики
Яндекс.Метрика

 
Обновленно: 27.03.2010

MCP2200 преобразователь протоколов USB в UART с дополнительными линиями ввода/вывода, скачать PDF

The MCP2200 Universal Serial Bus (USB) • Supports full-speed USB (12 Mb/s) • Implements USB protocol composite device CDC device for communications, configuration and I/O control • 128 byte buffer to handle data throughput at any UART baud rate: - 64byte transmit - 64 byte receive • Fully configurable VID and PID assignments, and string descriptors • Bus powered or self-powered • USB 2.0 Compliant (certification #: TBD) USB Driver and Software Support • Uses standard Microsoft® Windows® drivers for Virtual Com Port (VCP): - Windows XP(SP2 and later)/Vista/7 • Configuration utility for initial configuration Universal Asynchronous Receiver/Transmitter (UART) • Responds to SET LINE CODING commands to dynamically change baud rates • Supports baud rates: 300-1000k • Hardware flow control • UART signal polarity option General Purpose Input/Output (GPIO) Pins • Eight (8) general purpose I/O pins EEPROM • 256 bytes of user EEPROM Other • USB activity LED outputs (TxLED and RxLED) • SSPND output pin • USBCFG output pin (indicates if requested current is allowed) • Operating voltage: 3.0-5.5V • Oscillator input: 12 MHz • ESD protection > 4 kV HBM • Industrial (I) Operating Temperature: -40°C to +85°C